# Merge Sort Algorithm

• Difficulty Level : Medium
• Last Updated : 01 Sep, 2022

The Merge Sort algorithm is a sorting algorithm that is based on the Divide and Conquer paradigm. In this algorithm, the array is initially divided into two equal halves and then they are combined in a sorted manner.

## Merge Sort Working Process:

Think of it as a recursive algorithm continuously splits the array in half until it cannot be further divided. This means that if the array becomes empty or has only one element left, the dividing will stop, i.e. it is the base case to stop the recursion. If the array has multiple elements, split the array into halves and recursively invoke the merge sort on each of the halves. Finally, when both halves are sorted, the merge operation is applied. Merge operation is the process of taking two smaller sorted arrays and combining them to eventually make a larger one. ## Illustration:

To know the functioning of merge sort, lets consider an array arr[] = {38, 27, 43, 3, 9, 82, 10}

• At first, check if the left index of array is less than the right index, if yes then calculate its mid point • Now, as we already know that merge sort first divides the whole array iteratively into equal halves, unless the atomic values are achieved.
• Here, we see that an array of 7 items is divided into two arrays of size 4 and 3 respectively. • Now, again find that is left index is less than the right index for both arrays, if found yes, then again calculate mid points for both the arrays. • Now, further divide these two arrays into further halves, until the atomic units of the array is reached and further division is not possible. • After dividing the array into smallest units, start merging the elements again based on comparison of size of elements
• Firstly, compare the element for each list and then combine them into another list in a sorted manner. • After the final merging, the list looks like this:  The following diagram shows the complete merge sort process for an example array {38, 27, 43, 3, 9, 82, 10}.

If we take a closer look at the diagram, we can see that the array is recursively divided into two halves till the size becomes 1. Once the size becomes 1, the merge processes come into action and start merging arrays back till the complete array is merged. Recursive steps of merge sort

Recommended Practice

## Algorithm:

step 1: start

step 2: declare array and left, right, mid variable

step 3: perform merge function.
if left > right
return
mid= (left+right)/2
mergesort(array, left, mid)
mergesort(array, mid+1, right)
merge(array, left, mid, right)

step 4: Stop

Follow the steps below the solve the problem:

MergeSort(arr[], l,  r)
If r > l

• Find the middle point to divide the array into two halves:
• middle m = l + (r – l)/2
• Call mergeSort for first half:
• Call mergeSort(arr, l, m)
• Call mergeSort for second half:
• Call mergeSort(arr, m + 1, r)
• Merge the two halves sorted in steps 2 and 3:
• Call merge(arr, l, m, r)

Below is the implementation of the above approach:

## C++

 `// C++ program for Merge Sort``#include ``using` `namespace` `std;`` ` `// Merges two subarrays of array[].``// First subarray is arr[begin..mid]``// Second subarray is arr[mid+1..end]``void` `merge(``int` `array[], ``int` `const` `left, ``int` `const` `mid,``           ``int` `const` `right)``{``    ``auto` `const` `subArrayOne = mid - left + 1;``    ``auto` `const` `subArrayTwo = right - mid;`` ` `    ``// Create temp arrays``    ``auto` `*leftArray = ``new` `int``[subArrayOne],``         ``*rightArray = ``new` `int``[subArrayTwo];`` ` `    ``// Copy data to temp arrays leftArray[] and rightArray[]``    ``for` `(``auto` `i = 0; i < subArrayOne; i++)``        ``leftArray[i] = array[left + i];``    ``for` `(``auto` `j = 0; j < subArrayTwo; j++)``        ``rightArray[j] = array[mid + 1 + j];`` ` `    ``auto` `indexOfSubArrayOne``        ``= 0, ``// Initial index of first sub-array``        ``indexOfSubArrayTwo``        ``= 0; ``// Initial index of second sub-array``    ``int` `indexOfMergedArray``        ``= left; ``// Initial index of merged array`` ` `    ``// Merge the temp arrays back into array[left..right]``    ``while` `(indexOfSubArrayOne < subArrayOne``           ``&& indexOfSubArrayTwo < subArrayTwo) {``        ``if` `(leftArray[indexOfSubArrayOne]``            ``<= rightArray[indexOfSubArrayTwo]) {``            ``array[indexOfMergedArray]``                ``= leftArray[indexOfSubArrayOne];``            ``indexOfSubArrayOne++;``        ``}``        ``else` `{``            ``array[indexOfMergedArray]``                ``= rightArray[indexOfSubArrayTwo];``            ``indexOfSubArrayTwo++;``        ``}``        ``indexOfMergedArray++;``    ``}``    ``// Copy the remaining elements of``    ``// left[], if there are any``    ``while` `(indexOfSubArrayOne < subArrayOne) {``        ``array[indexOfMergedArray]``            ``= leftArray[indexOfSubArrayOne];``        ``indexOfSubArrayOne++;``        ``indexOfMergedArray++;``    ``}``    ``// Copy the remaining elements of``    ``// right[], if there are any``    ``while` `(indexOfSubArrayTwo < subArrayTwo) {``        ``array[indexOfMergedArray]``            ``= rightArray[indexOfSubArrayTwo];``        ``indexOfSubArrayTwo++;``        ``indexOfMergedArray++;``    ``}``    ``delete``[] leftArray;``    ``delete``[] rightArray;``}`` ` `// begin is for left index and end is``// right index of the sub-array``// of arr to be sorted */``void` `mergeSort(``int` `array[], ``int` `const` `begin, ``int` `const` `end)``{``    ``if` `(begin >= end)``        ``return``; ``// Returns recursively`` ` `    ``auto` `mid = begin + (end - begin) / 2;``    ``mergeSort(array, begin, mid);``    ``mergeSort(array, mid + 1, end);``    ``merge(array, begin, mid, end);``}`` ` `// UTILITY FUNCTIONS``// Function to print an array``void` `printArray(``int` `A[], ``int` `size)``{``    ``for` `(``auto` `i = 0; i < size; i++)``        ``cout << A[i] << ``" "``;``}`` ` `// Driver code``int` `main()``{``    ``int` `arr[] = { 12, 11, 13, 5, 6, 7 };``    ``auto` `arr_size = ``sizeof``(arr) / ``sizeof``(arr);`` ` `    ``cout << ``"Given array is \n"``;``    ``printArray(arr, arr_size);`` ` `    ``mergeSort(arr, 0, arr_size - 1);`` ` `    ``cout << ``"\nSorted array is \n"``;``    ``printArray(arr, arr_size);``    ``return` `0;``}`` ` `// This code is contributed by Mayank Tyagi``// This code was revised by Joshua Estes`

## C

 `/* C program for Merge Sort */``#include ``#include `` ` `// Merges two subarrays of arr[].``// First subarray is arr[l..m]``// Second subarray is arr[m+1..r]``void` `merge(``int` `arr[], ``int` `l, ``int` `m, ``int` `r)``{``    ``int` `i, j, k;``    ``int` `n1 = m - l + 1;``    ``int` `n2 = r - m;`` ` `    ``/* create temp arrays */``    ``int` `L[n1], R[n2];`` ` `    ``/* Copy data to temp arrays L[] and R[] */``    ``for` `(i = 0; i < n1; i++)``        ``L[i] = arr[l + i];``    ``for` `(j = 0; j < n2; j++)``        ``R[j] = arr[m + 1 + j];`` ` `    ``/* Merge the temp arrays back into arr[l..r]*/``    ``i = 0; ``// Initial index of first subarray``    ``j = 0; ``// Initial index of second subarray``    ``k = l; ``// Initial index of merged subarray``    ``while` `(i < n1 && j < n2) {``        ``if` `(L[i] <= R[j]) {``            ``arr[k] = L[i];``            ``i++;``        ``}``        ``else` `{``            ``arr[k] = R[j];``            ``j++;``        ``}``        ``k++;``    ``}`` ` `    ``/* Copy the remaining elements of L[], if there``    ``are any */``    ``while` `(i < n1) {``        ``arr[k] = L[i];``        ``i++;``        ``k++;``    ``}`` ` `    ``/* Copy the remaining elements of R[], if there``    ``are any */``    ``while` `(j < n2) {``        ``arr[k] = R[j];``        ``j++;``        ``k++;``    ``}``}`` ` `/* l is for left index and r is right index of the``sub-array of arr to be sorted */``void` `mergeSort(``int` `arr[], ``int` `l, ``int` `r)``{``    ``if` `(l < r) {``        ``// Same as (l+r)/2, but avoids overflow for``        ``// large l and h``        ``int` `m = l + (r - l) / 2;`` ` `        ``// Sort first and second halves``        ``mergeSort(arr, l, m);``        ``mergeSort(arr, m + 1, r);`` ` `        ``merge(arr, l, m, r);``    ``}``}`` ` `/* UTILITY FUNCTIONS */``/* Function to print an array */``void` `printArray(``int` `A[], ``int` `size)``{``    ``int` `i;``    ``for` `(i = 0; i < size; i++)``        ``printf``(``"%d "``, A[i]);``    ``printf``(``"\n"``);``}`` ` `/* Driver code */``int` `main()``{``    ``int` `arr[] = { 12, 11, 13, 5, 6, 7 };``    ``int` `arr_size = ``sizeof``(arr) / ``sizeof``(arr);`` ` `    ``printf``(``"Given array is \n"``);``    ``printArray(arr, arr_size);`` ` `    ``mergeSort(arr, 0, arr_size - 1);`` ` `    ``printf``(``"\nSorted array is \n"``);``    ``printArray(arr, arr_size);``    ``return` `0;``}`

## Java

 `/* Java program for Merge Sort */``class` `MergeSort ``{``    ``// Merges two subarrays of arr[].``    ``// First subarray is arr[l..m]``    ``// Second subarray is arr[m+1..r]``    ``void` `merge(``int` `arr[], ``int` `l, ``int` `m, ``int` `r)``    ``{``        ``// Find sizes of two subarrays to be merged``        ``int` `n1 = m - l + ``1``;``        ``int` `n2 = r - m;`` ` `        ``/* Create temp arrays */``        ``int` `L[] = ``new` `int``[n1];``        ``int` `R[] = ``new` `int``[n2];`` ` `        ``/*Copy data to temp arrays*/``        ``for` `(``int` `i = ``0``; i < n1; ++i)``            ``L[i] = arr[l + i];``        ``for` `(``int` `j = ``0``; j < n2; ++j)``            ``R[j] = arr[m + ``1` `+ j];`` ` `        ``/* Merge the temp arrays */`` ` `        ``// Initial indexes of first and second subarrays``        ``int` `i = ``0``, j = ``0``;`` ` `        ``// Initial index of merged subarray array``        ``int` `k = l;``        ``while` `(i < n1 && j < n2) {``            ``if` `(L[i] <= R[j]) {``                ``arr[k] = L[i];``                ``i++;``            ``}``            ``else` `{``                ``arr[k] = R[j];``                ``j++;``            ``}``            ``k++;``        ``}`` ` `        ``/* Copy remaining elements of L[] if any */``        ``while` `(i < n1) {``            ``arr[k] = L[i];``            ``i++;``            ``k++;``        ``}`` ` `        ``/* Copy remaining elements of R[] if any */``        ``while` `(j < n2) {``            ``arr[k] = R[j];``            ``j++;``            ``k++;``        ``}``    ``}`` ` `    ``// Main function that sorts arr[l..r] using``    ``// merge()``    ``void` `sort(``int` `arr[], ``int` `l, ``int` `r)``    ``{``        ``if` `(l < r) {``            ``// Find the middle point``            ``int` `m =l+ (r-l)/``2``;`` ` `            ``// Sort first and second halves``            ``sort(arr, l, m);``            ``sort(arr, m + ``1``, r);`` ` `            ``// Merge the sorted halves``            ``merge(arr, l, m, r);``        ``}``    ``}`` ` `    ``/* A utility function to print array of size n */``    ``static` `void` `printArray(``int` `arr[])``    ``{``        ``int` `n = arr.length;``        ``for` `(``int` `i = ``0``; i < n; ++i)``            ``System.out.print(arr[i] + ``" "``);``        ``System.out.println();``    ``}`` ` `    ``// Driver code``    ``public` `static` `void` `main(String args[])``    ``{``        ``int` `arr[] = { ``12``, ``11``, ``13``, ``5``, ``6``, ``7` `};`` ` `        ``System.out.println(``"Given Array"``);``        ``printArray(arr);`` ` `        ``MergeSort ob = ``new` `MergeSort();``        ``ob.sort(arr, ``0``, arr.length - ``1``);`` ` `        ``System.out.println(``"\nSorted array"``);``        ``printArray(arr);``    ``}``}``/* This code is contributed by Rajat Mishra */`

## Python3

 `# Python program for implementation of MergeSort``def` `mergeSort(arr):``    ``if` `len``(arr) > ``1``:`` ` `         ``# Finding the mid of the array``        ``mid ``=` `len``(arr)``/``/``2`` ` `        ``# Dividing the array elements``        ``L ``=` `arr[:mid]`` ` `        ``# into 2 halves``        ``R ``=` `arr[mid:]`` ` `        ``# Sorting the first half``        ``mergeSort(L)`` ` `        ``# Sorting the second half``        ``mergeSort(R)`` ` `        ``i ``=` `j ``=` `k ``=` `0`` ` `        ``# Copy data to temp arrays L[] and R[]``        ``while` `i < ``len``(L) ``and` `j < ``len``(R):``            ``if` `L[i] < R[j]:``                ``arr[k] ``=` `L[i]``                ``i ``+``=` `1``            ``else``:``                ``arr[k] ``=` `R[j]``                ``j ``+``=` `1``            ``k ``+``=` `1`` ` `        ``# Checking if any element was left``        ``while` `i < ``len``(L):``            ``arr[k] ``=` `L[i]``            ``i ``+``=` `1``            ``k ``+``=` `1`` ` `        ``while` `j < ``len``(R):``            ``arr[k] ``=` `R[j]``            ``j ``+``=` `1``            ``k ``+``=` `1`` ` `# Code to print the list`` ` ` ` `def` `printList(arr):``    ``for` `i ``in` `range``(``len``(arr)):``        ``print``(arr[i], end``=``" "``)``    ``print``()`` ` ` ` `# Driver Code``if` `__name__ ``=``=` `'__main__'``:``    ``arr ``=` `[``12``, ``11``, ``13``, ``5``, ``6``, ``7``]``    ``print``(``"Given array is"``, end``=``"\n"``)``    ``printList(arr)``    ``mergeSort(arr)``    ``print``(``"Sorted array is: "``, end``=``"\n"``)``    ``printList(arr)`` ` `# This code is contributed by Mayank Khanna`

## C#

 `// C# program for Merge Sort``using` `System;``class` `MergeSort {`` ` `    ``// Merges two subarrays of []arr.``    ``// First subarray is arr[l..m]``    ``// Second subarray is arr[m+1..r]``    ``void` `merge(``int``[] arr, ``int` `l, ``int` `m, ``int` `r)``    ``{``        ``// Find sizes of two``        ``// subarrays to be merged``        ``int` `n1 = m - l + 1;``        ``int` `n2 = r - m;`` ` `        ``// Create temp arrays``        ``int``[] L = ``new` `int``[n1];``        ``int``[] R = ``new` `int``[n2];``        ``int` `i, j;`` ` `        ``// Copy data to temp arrays``        ``for` `(i = 0; i < n1; ++i)``            ``L[i] = arr[l + i];``        ``for` `(j = 0; j < n2; ++j)``            ``R[j] = arr[m + 1 + j];`` ` `        ``// Merge the temp arrays`` ` `        ``// Initial indexes of first``        ``// and second subarrays``        ``i = 0;``        ``j = 0;`` ` `        ``// Initial index of merged``        ``// subarray array``        ``int` `k = l;``        ``while` `(i < n1 && j < n2) {``            ``if` `(L[i] <= R[j]) {``                ``arr[k] = L[i];``                ``i++;``            ``}``            ``else` `{``                ``arr[k] = R[j];``                ``j++;``            ``}``            ``k++;``        ``}`` ` `        ``// Copy remaining elements``        ``// of L[] if any``        ``while` `(i < n1) {``            ``arr[k] = L[i];``            ``i++;``            ``k++;``        ``}`` ` `        ``// Copy remaining elements``        ``// of R[] if any``        ``while` `(j < n2) {``            ``arr[k] = R[j];``            ``j++;``            ``k++;``        ``}``    ``}`` ` `    ``// Main function that``    ``// sorts arr[l..r] using``    ``// merge()``    ``void` `sort(``int``[] arr, ``int` `l, ``int` `r)``    ``{``        ``if` `(l < r) {``            ``// Find the middle``            ``// point``            ``int` `m = l+ (r-l)/2;`` ` `            ``// Sort first and``            ``// second halves``            ``sort(arr, l, m);``            ``sort(arr, m + 1, r);`` ` `            ``// Merge the sorted halves``            ``merge(arr, l, m, r);``        ``}``    ``}`` ` `    ``// A utility function to``    ``// print array of size n */``    ``static` `void` `printArray(``int``[] arr)``    ``{``        ``int` `n = arr.Length;``        ``for` `(``int` `i = 0; i < n; ++i)``            ``Console.Write(arr[i] + ``" "``);``        ``Console.WriteLine();``    ``}`` ` `    ``// Driver code``    ``public` `static` `void` `Main(String[] args)``    ``{``        ``int``[] arr = { 12, 11, 13, 5, 6, 7 };``        ``Console.WriteLine(``"Given Array"``);``        ``printArray(arr);``        ``MergeSort ob = ``new` `MergeSort();``        ``ob.sort(arr, 0, arr.Length - 1);``        ``Console.WriteLine(``"\nSorted array"``);``        ``printArray(arr);``    ``}``}`` ` `// This code is contributed by Princi Singh`

## Javascript

 ``

Output

```Given array is
12 11 13 5 6 7
Sorted array is
5 6 7 11 12 13 ```

Time Complexity: O(N log(N)),  Sorting arrays on different machines. Merge Sort is a recursive algorithm and time complexity can be expressed as following recurrence relation.

T(n) = 2T(n/2) + θ(n)

The above recurrence can be solved either using the Recurrence Tree method or the Master method. It falls in case II of the Master Method and the solution of the recurrence is θ(Nlog(N)). The time complexity of Merge Sort isθ(Nlog(N)) in all 3 cases (worst, average, and best) as merge sort always divides the array into two halves and takes linear time to merge two halves.

Auxiliary Space: O(n), In merge sort all elements are copied into an auxiliary array. So N auxiliary space is required for merge sort.

## Is Merge sort In Place?

No, In merge sort the merging step requires extra space to store the elements.

## Is Merge sort Stable?

Yes, merge sort is stable.

## Applications of Merge Sort:

• Merge Sort is useful for sorting linked lists in O(N log N) time. In the case of linked lists, the case is different mainly due to the difference in memory allocation of arrays and linked lists. Unlike arrays, linked list nodes may not be adjacent in memory. Unlike an array, in the linked list, we can insert items in the middle in O(1) extra space and O(1) time. Therefore, the merge operation of merge sort can be implemented without extra space for linked lists.
In arrays, we can do random access as elements are contiguous in memory. Let us say we have an integer (4-byte) array A and let the address of A be x then to access A[i], we can directly access the memory at (x + i*4). Unlike arrays, we can not do random access in the linked list. Quick Sort requires a lot of this kind of access. In a linked list to access i’th index, we have to travel each and every node from the head to i’th node as we don’t have a contiguous block of memory. Therefore, the overhead increases for quicksort. Merge sort accesses data sequentially and the need of random access is low.
• Inversion Count Problem
• Used in External Sorting

## Drawbacks of Merge Sort:

Other Sorting Algorithms on GeeksforGeeks:
3-way Merge Sort, Selection Sort, Bubble Sort, Insertion Sort, Merge Sort, Heap Sort, QuickSort, Radix Sort, Counting Sort, Bucket Sort, ShellSort, Comb Sort
Please write comments if you find anything incorrect, or if you want to share more information about the topic discussed above.

My Personal Notes arrow_drop_up